top of page

This is our latest and greatest go to servo for use on large scale gassers. It features all the great features we've come to expect and love from our other premium servos.



Application / Suitable

Priority for Helicopter cyclic [ Swashplate / CCPM ] & 3D Airplane, Jet & 1/8th Buggy, Truggy.  (EP / Gas / Nitro)



Torque At 6.0V22.1 kg-cm / 306.9 oz-in
Torque At 7.4V28.4 kg-cm / 394.5 oz-in
Torque At 8.4V32.2 kg-cm / 447.3 oz-in
Speed At 6.0V0.08 sec / 60°
Speed At 7.4V0.06 sec / 60°
Speed At 8.4V0.05 sec / 60°


Protection Mechanism

Soft Start ProtectionSoft start to a neutral position.
Over Voltage ProtectionOver 9.0V drive the protection mode and 8.4V return to normal mode.
Low Voltage ProtectionLower than 4.0V, drive the protection mode and 4.5V return to normal mode.
Locked Rotor ProtectionStall in 5 sec, output torque goes down.
Temperature ProtectionOverheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode.
Lose Control ProtectionWhen losing the transmitter signal, that servo will be back to the neutral position immediately and lock.


Power Supply

Operating Voltage Range 4.5V ~ 8.5V ( 4 ~ 6 Cell Ni-MH or 2S Li-Poly / 2S Li-Fe)


Control Specification

Control SystemDigital Controller / AD 12-Bits Resolution ( 4096 Steps )
Frequency:Up to 333Hz / Neutral:1500us or 1520us
Dead Band Width0.001ms ( Default:1us)


Mechanical Specifications

Ball BearingDual ball bearings
GearAll Steel Alloy Metal Gears
MotorHigh Premium Coreless Motor
Horn / Gear Spline25 Teeth ( Same as F-Type )


Physical Specifications

Dimension (mm)40.5 x 20 x 39 mm / 1.59 x 0.79 x 1.54 in
Weight (gram)66.0 ± 1 grams / 2.33 oz


    bottom of page